This material specification applies to 4mm – 40mm thick plates of wear-resistant special structural steel XAR 600. The extraordinary high resistance to abrasion of XAR 600 results from a special water quenching process.

Wear Resistant Steel - XAR 500 is available in 3mm to 100 mm solid plates and is made up of fine-grained micro structure. Nitrogen is immersed to form nitrides through Al and, where pertinent, Ti. Offered XAR 500 steel is formable and easily weldable. This steel is available for higher abrasive wear and gives excellent toughness properties for reliable performance.

AR450 wear resistant abrasion resistant steel plate XAR 450 XAR/AR is available in various grades from 300 HBW to 600 HBW and plate thicknesses from 4 to 100mm, tailored to particular applications, e.g. mining equipment, earthmoving machinery, steel mill, etc. Product Detail Rocks, sand, coal etc.
This grade is a upgraded version of XAR400 with abrasion resistant characteristic improved, the working temperature remains below 400℃.

This grade is the most commonly used steel grade with normal abrasion resistant level, it has extraordinary cold formability and weldablity, its abrasion resistant property doesn’t get weekend when the temperature is below 400℃.

WELTEN 780 Steel Plates are applicable in chemical and marine industries. Their resistant properties make them applicable. Such industries are some of the sectors where working atmospheres are extremely corrosive. The corrosion-resistant is an important attribute of these plates. They don’t get rusted through various harmful toxic agents. These agents are acid, oxidizing, reducing, and inorganic in nature. The typical chemicals that are used involve acetic, organic, chlorine, sulfur, and more. Corroding via chemicals completely damage plates but WELTEN 780 Tempered and Quenched Plate show no effect.

Strenx 700 MC is a hot-rolled structural cold-forming steel with a minimum yield strength of 700 MPa intended to give stronger and lighter structures. Strenx 700 MC meet or exceed the requirements of S700MC in EN 10149-2. Typical applications are a wide range of components and parts for example demanding load bearing structures.

Strenx 700 MC is available in thicknesses of 2.00-10.00 mm and widths up to 1600 mm as coils, slit coils or cut to length sheets in lengths up to 16 meters.

Steel that is Generations Ahead for Defence.
Armor and ballistic steel plate can be utilized in the manufacture of military vehicles, structural housings with high protection, armaments and other protective structures and varied military applications. All sold plates are Defence compliant and include full certification documentation, ballistic data, chemistry readings and physical properties where applicable to guarantee the integrity of the material.

Stanless is a Stainless steel containing at least 10.5% chromium, less than 1.2% carbon and other alloying elements.

Stanhard is a heavy duty ultra-tough steel plate with hardened microstructure which is specially designed to withstand harsh and heavy earth moving applications. Its exceptional strength, toughness, weldability and fatigue resistance have won it several international endorsements making it the perfect steel for heavy earth moving equipment manufacturers; be it for exploration or for extraction.

Stan Alloy are Nickel alloys with nickel as principal element. Complete solid solubility exists between nickel and copper.

StanSteel is a category of steel used for various kind of construction projects and that is produced with a particular cross section or shape, and some specified values of strength and chemical composition.

Clad plate can reduce equipment weight, fabrication time and material cost.
Clad plate combines the high mechanical properties of the backing and the high corrosion resistance of the cladding. Backing is supplied with Normalizing (N) or Quenching with Tempering (QT) heat treatment.

Stan-Weather is high strength, low alloy weldable structural steel with exceptional weathering resistance.

Stainless steel 310S plate is more deterioration immune than the majority of warmth resistant alloys. 310/310S Sheets & Plates are readily fabricated by standard industrial procedures. In comparing to carbon steel, stainless-steels are harder and also often tend to work harden quickly.

S890QL is an extra high strength steel to EN10025-6:2004 and the steel number is 1.8983. S890QL has a minimum yield strength of 890Mpa in quenched and tempered conditions, with it’s low temperature of -40 ºC, this steel grade perform good durability in extreme working environments.

S890QL extra high strength structural steel plate is an ideal leaner weight for your project as it has 224% more higher strength than S275JR structural steel, it is relatively easy welding and f children comfabricate. It has becoming more and more popular in crane, oil and gas.

S700MC – a high yield structural steel supplied under the EN10149: Part2 specification. Due to the materials high yield (700Mpa min.) it can be used in a variety of load bearing applications.
Popularly, the steel is used for cold formed components including cold pressed parts and sections. Typical applications include steel frames, load bearing beams and pipework.
S700MC offers excellent bending and folding properties though case should be taken in ensuring that the steel is the right specification for the job.

S550MC can be used in numerous applications including steel framed structures, structural pipes and cold rolled sections. As the material is designed to be used in load bearing applications, care should be taken when ordering to ensure that the steel has qualities required for the job in hand.
Heat treatment of S550MC is not advisable as this will reduce the yield strength of the material.

The plates are designed perfectly in different dimensions, specifications, and forms. The industry is providing the wider collection of the plates in order to easily meet the specification requirements of the buyer that perfectly suits the desirability. Also, they are providing the product at good rates. Talking about the manufacturing of the S355J2W+N PLATES, definitely, in order to bring out the very good quality of plates, high quality of alloy is used. The industry is also utilizing the effectively available latest technology and modern tools that are 100% guaranteeing those in manufacturing a very good quality of plates. Keeping in mind the norms and policies that the industry has set up and product quality standards have proved to be highly beneficial. However, the equal contribution of both team members that is the quality control team and professional expert team is helping manufacturers in offering excellent quality of plates.

ROCKSTAR 500 Steel Plates available at different standards, specifications, wall thickness, widths, lengths, surface finishes, and heat treatment. All ranges of plates are exceeding or are conforming to the product quality standards. Also, these plates are provided to the clients at custom-made specifications as per the client’s demands. Rockstar 500 is a wear-resistant material that is quenched and tempered. Also, it is having a very good combination of toughness, weldability, and formability for meeting various application demands.

Rockstar 450 plates is applicable in the manufacturing of buckets, crushers, liners for truck beds, hoppers, chutes, excavators and conveyor troughs, concrete mixer drums, trash truck bottoms, bucket lips, street sweepers and dump trailers and many more. These Rockstar 450 Plates are made up of an alloy of carbon manganese molybdenum sulphuric chromium nickel silicon and boron with various chemical compositions depending upon the dimensions of the Plates used in various applications. These resistant to corrosion plates are having the power of welding ability and working ability that is the same as that to the ordinary steel. However, the corrosion-resistant steel plate is inexpensive as compared to stainless steel.