Stainless Steel 317L Seamless Pipes & Tubes Manufacturer & Supplier

SS 317L (UNS S31703) contains 3-4% molybdenum, providing significantly better pitting and crevice corrosion resistance than 316L. The low carbon content ensures weldability without sensitization. It bridges the gap between standard austenitic grades and expensive nickel alloys.

UNS: S31703 | Category: Austenitic Stainless Steel | Werkstoff Nr: 1.4438 | EN Name: X2CrNiMo18-15-4

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 80S

Chemical Composition (%)

CMnSiCrNiMoPS
0.030 max2.00 max0.75 max18.0-20.011.0-15.03.0-4.00.045 max0.030 max

Mechanical Properties

Tensile Strength
515 MPa min
Yield Strength
205 MPa min
Elongation
35% min
Hardness
95 HRB max

Physical Properties

Density
7.98 g/cm3
Melting Range
1375-1400 C
Thermal Conductivity
14.4 W/m-K
Electrical Resistivity
790 nOhm-m
Specific Heat
500 J/kg-K
Coeff. of Thermal Expansion
16.5 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
~29
Max Service Temp (Oxidizing)
870 C
Intergranular Corrosion
Resistant (low carbon)
Stress Corrosion Cracking
Superior to 316L in chlorides
General Corrosion Rate
<0.02 mm/yr in sulfuric acid
Seawater Resistance
Good - superior to 316L

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
TP317L
JIS
SUS 317L
BS
317S12

Frequently Asked Questions

What is the chemical composition of SS 317L?

SS 317L contains C 0.030 max, Mn 2.00 max, Si 0.75 max, Cr 18.0-20.0, Ni 11.0-15.0, Mo 3.0-4.0, P 0.045 max, S 0.030 max (weight %).

What are the mechanical properties of SS 317L?

Tensile Strength: 515 MPa min; Yield Strength: 205 MPa min; Elongation: 35% min; Hardness: 95 HRB max.

What are the equivalent grades of SS 317L?

Nearest equivalents of SS 317L: TP317L (ASTM), SUS 317L (JIS), 317S12 (BS). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Alloys supply SS 317L to?

SS 317L is supplied to ASTM A312 / ASME SA312, ASTM A213 / ASME SA213, ASTM A269 and DIN EN 10216-5.

What sizes of SS 317L are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is SS 317L used for?

SS 317L is used for Flue gas desulfurization systems, Pulp & paper bleach plants, Phosphoric acid production, Sulfuric acid processing, Chemical reactor vessels and Organic acid handling.