Stainless Steel 316H Seamless Pipes & Tubes Manufacturer & Supplier
SS 316H (UNS S31609) is the high-carbon version of 316, with carbon controlled to 0.04-0.10%. It combines the molybdenum-enhanced corrosion resistance of 316 with superior creep strength at elevated temperatures (425-816C). This makes it the preferred choice for high-temperature service in corrosive environments where both properties are essential.
UNS: S31609 | Category: Austenitic Stainless Steel | Werkstoff Nr: 1.4919 | EN Name: X6CrNiMoTi17-12-2
Size Range
Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)
Wall Thickness: SCH 5S to SCH 160, XXS
Chemical Composition (%)
| C | Mn | Si | Cr | Ni | Mo | P | S |
|---|---|---|---|---|---|---|---|
| 0.04-0.10 | 2.00 max | 0.75 max | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 0.045 max | 0.030 max |
Mechanical Properties
- Tensile Strength
- 515 MPa min
- Yield Strength
- 205 MPa min
- Elongation
- 35% min
- Hardness
- 95 HRB max
Physical Properties
- Density
- 7.98 g/cm3
- Melting Range
- 1375-1400 C
- Thermal Conductivity
- 16.3 W/m-K
- Electrical Resistivity
- 740 nOhm-m
- Specific Heat
- 500 J/kg-K
- Coeff. of Thermal Expansion
- 15.9 um/m-C
Corrosion Resistance
- Pitting Resistance (PREN)
- ~24
- Max Service Temp (Oxidizing)
- 870 C (continuous)
- Intergranular Corrosion
- Susceptible if sensitized (higher carbon)
- Stress Corrosion Cracking
- Better than 304H in chlorides
- General Corrosion Rate
- <0.05 mm/yr in most acids
- Seawater Resistance
- Moderate - better than 304
Applicable Standards
- ASTM A312 / ASME SA312
- ASTM A213 / ASME SA213
- ASTM A269
- DIN EN 10216-5
Applications
- High-temperature service (425-816C) in corrosive environments
- Power plant superheater tubes with chloride exposure
- Petrochemical furnace tubes with acid contact
- Refinery heater tubes requiring Mo for corrosion
- Chemical plant heat exchangers at elevated temps
- Boiler tubes in marine/offshore environments
Industries Served
- Power Generation
- Petrochemical
- Chemical Processing
- Marine
- Refineries
- Boiler & Pressure Vessels
Key Advantages
- Superior creep strength at 425-816C with Mo-enhanced corrosion resistance
- Higher carbon provides better high-temperature rupture properties
- Better chloride resistance than 304H due to molybdenum content
- ASME approved for high-temperature pressure vessel service
- Excellent for boiler and superheater applications in corrosive environments
- Combines best of high-temp strength and pitting resistance
Equivalent Grades
- ASTM
- TP316H
- JIS
- SUS 316HTB
- BS
- 316S51
- GOST
- 08Kh17N13M2T
Frequently Asked Questions
What is the chemical composition of SS 316H?
SS 316H contains C 0.04-0.10, Mn 2.00 max, Si 0.75 max, Cr 16.0-18.0, Ni 10.0-14.0, Mo 2.0-3.0, P 0.045 max, S 0.030 max (weight %).
What are the mechanical properties of SS 316H?
Tensile Strength: 515 MPa min; Yield Strength: 205 MPa min; Elongation: 35% min; Hardness: 95 HRB max.
What are the equivalent grades of SS 316H?
Nearest equivalents of SS 316H: TP316H (ASTM), SUS 316HTB (JIS), 316S51 (BS), 08Kh17N13M2T (GOST). Equivalents are close matches, not identical; confirm against the governing standard.
Which standards does Stancor Alloys supply SS 316H to?
SS 316H is supplied to ASTM A312 / ASME SA312, ASTM A213 / ASME SA213, ASTM A269 and DIN EN 10216-5.
What sizes of SS 316H are available?
1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).
What is SS 316H used for?
SS 316H is used for High-temperature service (425-816C) in corrosive environments, Power plant superheater tubes with chloride exposure, Petrochemical furnace tubes with acid contact, Refinery heater tubes requiring Mo for corrosion, Chemical plant heat exchangers at elevated temps and Boiler tubes in marine/offshore environments.