Stainless Steel 316 / 316L Seamless Pipes & Tubes Manufacturer & Supplier

SS 316 / 316L (UNS S31600 / S31603) are molybdenum-bearing austenitic stainless steels with 2-3% Mo, providing significantly improved resistance to pitting and crevice corrosion in chloride environments. 316L is the low-carbon variant (C: 0.030% max) preferred for welded fabrication, eliminating the risk of intergranular corrosion.

UNS: S31600 / S31603 | Category: Austenitic Stainless Steel | Werkstoff Nr: 1.4401 / 1.4404 | EN Name: X5CrNiMo17-12-2 / X2CrNiMo17-12-2

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 160, XXS

Chemical Composition (%)

CMnSiCrNiMoPS
0.08 / 0.030 max2.00 max0.75 max16.0-18.010.0-14.02.0-3.00.045 max0.030 max

Mechanical Properties

Tensile Strength
515 / 485 MPa min
Yield Strength
205 / 170 MPa min
Elongation
35% min
Hardness
95 HRB max

Physical Properties

Density
7.98 g/cm3
Melting Range
1375-1400 C
Thermal Conductivity
16.3 W/m-K
Electrical Resistivity
740 nOhm-m
Specific Heat
500 J/kg-K
Coeff. of Thermal Expansion
15.9 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
~24
Max Service Temp (Oxidizing)
870 C
Intergranular Corrosion
316: Susceptible if sensitized / 316L: Resistant (low carbon)
Stress Corrosion Cracking
Better than 304 in chlorides
General Corrosion Rate
<0.05 mm/yr in most acids
Seawater Resistance
Moderate - better than 304

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
TP316 / TP316L
JIS
SUS 316 / SUS 316L
BS
316S31 / 316S11
GOST
08Kh17N13M2 / 03Kh17N14M2

Frequently Asked Questions

What is the chemical composition of SS 316 / 316L?

SS 316 / 316L contains C 0.08 / 0.030 max, Mn 2.00 max, Si 0.75 max, Cr 16.0-18.0, Ni 10.0-14.0, Mo 2.0-3.0, P 0.045 max, S 0.030 max (weight %).

What are the mechanical properties of SS 316 / 316L?

Tensile Strength: 515 / 485 MPa min; Yield Strength: 205 / 170 MPa min; Elongation: 35% min; Hardness: 95 HRB max.

What are the equivalent grades of SS 316 / 316L?

Nearest equivalents of SS 316 / 316L: TP316 / TP316L (ASTM), SUS 316 / SUS 316L (JIS), 316S31 / 316S11 (BS), 08Kh17N13M2 / 03Kh17N14M2 (GOST). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Alloys supply SS 316 / 316L to?

SS 316 / 316L is supplied to ASTM A312 / ASME SA312, ASTM A213 / ASME SA213, ASTM A269 and DIN EN 10216-5.

What sizes of SS 316 / 316L are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is SS 316 / 316L used for?

SS 316 / 316L is used for Marine environments and coastal installations, Chemical processing with chloride exposure, Pharmaceutical manufacturing equipment, Offshore oil & gas piping systems, Pulp and paper industry and Nuclear fuel reprocessing (316L).