Inconel 601 (UNS N06601) Seamless Pipes & Tubes Manufacturer & Supplier
Alloy 601 (Inconel 601, UNS N06601) is a nickel-chromium alloy with aluminum addition that provides outstanding oxidation resistance to 1250C. The aluminium content forms a tightly adhering oxide scale that resists spalling under thermal cycling conditions.
UNS: N06601 | Category: Nickel Alloy | Werkstoff Nr: 2.4851 | EN Name: NiCr23Fe15Al
Size Range
Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)
Wall Thickness: SCH 5S to SCH 80S
Chemical Composition (%)
| Ni | Cr | Fe | Al | C | Mn | Si | Cu | S |
|---|---|---|---|---|---|---|---|---|
| 58.0-63.0 | 21.0-25.0 | Remainder | 1.0-1.7 | 0.10 max | 1.00 max | 0.50 max | 1.00 max | 0.015 max |
Mechanical Properties
- Tensile Strength
- 550 MPa min
- Yield Strength
- 205 MPa min
- Elongation
- 30% min
- Hardness
- 90 HRB max
Physical Properties
- Density
- 8.11 g/cm3
- Melting Range
- 1301-1368 C
- Thermal Conductivity
- 11.2 W/m-K
- Electrical Resistivity
- 1190 nOhm-m
- Specific Heat
- 448 J/kg-K
- Coeff. of Thermal Expansion
- 13.75 um/m-C
Corrosion Resistance
- Pitting Resistance (PREN)
- N/A (Ni alloy)
- Max Service Temp (Oxidizing)
- 1250 C
- Intergranular Corrosion
- Good
- Stress Corrosion Cracking
- Excellent
- General Corrosion Rate
- Superior in oxidizing atmospheres
- Seawater Resistance
- Good
Applicable Standards
- ASTM B167 / ASME SB167
- ASTM B163 / ASME SB163
- ASTM B516 / ASME SB516
- DIN 17751
Applications
- Thermal processing equipment
- Radiant tubes in furnaces
- Combustion chambers and afterburners
- Petrochemical cracker tubes
- Mesh belts for glass annealing
- Catalytic converter substrates
Industries Served
- Heat Treatment
- Petrochemical
- Power Generation
- Glass Manufacturing
- Automotive
Key Advantages
- Outstanding oxidation resistance to 1250C
- Aluminium-enriched oxide scale resists thermal cycling
- Good carburization resistance
- Excellent resistance to high-temperature corrosion
- Better oxidation resistance than Alloy 600
Equivalent Grades
- ASTM
- N06601
- Trade
- Inconel 601
- DIN
- 2.4851
Frequently Asked Questions
What is the chemical composition of Alloy 601?
Alloy 601 contains Ni 58.0-63.0, Cr 21.0-25.0, Fe Remainder, Al 1.0-1.7, C 0.10 max, Mn 1.00 max, Si 0.50 max, Cu 1.00 max, S 0.015 max (weight %).
What are the mechanical properties of Alloy 601?
Tensile Strength: 550 MPa min; Yield Strength: 205 MPa min; Elongation: 30% min; Hardness: 90 HRB max.
What are the equivalent grades of Alloy 601?
Nearest equivalents of Alloy 601: N06601 (ASTM), Inconel 601 (Trade), 2.4851 (DIN). Equivalents are close matches, not identical; confirm against the governing standard.
Which standards does Stancor Alloys supply Alloy 601 to?
Alloy 601 is supplied to ASTM B167 / ASME SB167, ASTM B163 / ASME SB163, ASTM B516 / ASME SB516 and DIN 17751.
What sizes of Alloy 601 are available?
1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).
What is Alloy 601 used for?
Alloy 601 is used for Thermal processing equipment, Radiant tubes in furnaces, Combustion chambers and afterburners, Petrochemical cracker tubes, Mesh belts for glass annealing and Catalytic converter substrates.